Prop polishing

Discussions about AS400, AS450, AS500, AS600, AS650, AS650CE
Benutzeravatar
Hec In Omaha
Beiträge: 33
Registriert: Do Sep 15, 2016 3:14 am
Wohnort: Beaver Lake, Nebraska USA

Re: Prop polishing

Beitrag von Hec In Omaha » Fr Aug 25, 2017 6:49 pm

As far as I know, all props are the same. They all have the same part number.

Here is another powder coated prop going in a rebuilt AS400 I'm putting back together.

Hec
Dateianhänge
IMG_5544.JPG
Powder coated AS400 prop
If its not broken, then I can't fix it!

Michaelnep
Beiträge: 4
Registriert: Mo Jul 09, 2018 8:15 pm
Wohnort: Virgin Islands
Kontaktdaten:

Prop polishing

Beitrag von Michaelnep » Mi Jul 25, 2018 5:55 pm

Im not concerned with going 50, but with the 175 suzuki i should be able to hit that and in turn my cruise will be faster.
Im thinking of trying a 16" prop?? Any thoughts?

Benutzeravatar
Hec In Omaha
Beiträge: 33
Registriert: Do Sep 15, 2016 3:14 am
Wohnort: Beaver Lake, Nebraska USA

Re: Prop polishing

Beitrag von Hec In Omaha » Do Jul 26, 2018 5:20 pm

I don't think your post is in regards to an Aquascooter.

If you are referring to a boat prop, you will need to find one the physically fits so it needs to be the proper diameter. Next you will need the proper pitch so that the engine achieves the recommended Wide Open Throttle RPM's under normal conditions. Too much pitch and the engine will lug and not achieve peak horsepower. Not enough pitch and the engine will over REV causing damage! The rule of thumb is that an increase or decrease of 1 in pitch will result in about a 200 RPM increase or decrease in RPM's. You will need to determine what size your prop is now and record how many RPM's the engine makes at Wide Open Throttle. Compare the RPM's to what the manufacturer recommends and either reduce or increase the pitch of the prop accordingly. Prop sizes are given with the diameter first then pitch. So a 15 x 12 prop would have a 15" Diameter and a 12" Pitch.

Hec
If its not broken, then I can't fix it!

Antworten